Mane-ly Long Hydrate 24 Empty Mix Bottle

EMPTY SPRAY AND MIXING BOTTLES to formulate and apply Hydrate 24. Hydrate 24 is made from our Conditioner! The formula to mix is on both bottles and they allow to formulate a proper mix for best results and less waste of product.

The Mix/Blend Bottle is used to formulate H-24, spray and pour with too. The Hydrasol sprayer is the quietest on the market (horses aren’t afraid) and the thicker viscosity of the 24 sprays out properly for proper usage, expansive and hard to reach areas too! Used with our Dry Groom System.

If you already have the Conditioner, then all you NEED are these 2 EMPTY  Bottles to Mix Hydrate 24 and apply with ease. An easy system allowing you to make several bottles, saving you $$$$. A Leave in product that serves many purposes. Read more about Hydrate 24 (H-24)  under the Hydrate 24 Essentials Kit. If you do not have the conditioner then get the H24 kits that are available.

Includes not just any 2 bottles! Both bottles are needed to formulate and apply  H-24 . The Mix bottle not only has the recipe and measurement levels but it can also spray out a more concentrated version of H-24 and the Hydrasol sprayer, (an aerosol like spray), can  cover large and hard to reach areas. We also provide a pop up pour cap to use to fill the Hydrasol bottle and to use the mix to pour onto a H24 applicator brush for faster application to the full body.

**CONDITIONER IS NEEDED TO MAKE HYDRATE 24!

*The Flarisol Spray Bottle (Black Cap)

The Flarisol sprayers are tested at the factory prior to shipment and before packing from the Mane-ly warehouse, and there will usually have some water remaining. Sometimes over the course of the shipment there are temperature changes, and the sprayers develop a “vapor lock” occasionally. If you are experiencing this with your new unused bottle, please gently try the following to release the vapor lock.

–  gently TAP the spray head on the table and the sprayer will spray sometimes after the first tap, others after a few good taps. Another trick is squeezing the trigger, you will feel pressure building and squeeze the bottle gently. This also makes the sprayers work.

Please understand that these sprayers work via “pre-compression” which means once they are primed, solution will remain in the chamber. Should these sprayers go through enough of a temperature change, a vapor lock can occur. It appears that this is the nature of this bottle.

To help the extend the longevity of your sprayer after use:

• Twist the sprayer off and empty the spray chamber of its solution by spraying until it empties out, then screw back on the bottle for use next time.
• Add another step and rinse with warm water too!

-Make sure your mix solution is properly mixed and not to thick, if it has thickened just add hotter temp water before use and shake well to blend.

*please note all sprayers will need to be replaced over usage and time, normal wear when spraying a viscous liquid-Sometimes it’s just time to replace and get a new bottle.